QbD Based Formulation Development and Optimisation of Ozenoxacin Topical Nano-Emulgel and Efficacy Evaluation Using Impetigo Mice Model.

To formulate and optimize Ozenoxacin nano-emulsion using Quality by Design (QbD) concept by means of Box-Behnken Design (BBD) and converting it to a gel to form Ozenoxacin nano-emulgel followed by physico-chemical, in-vitro, ex-vivo and in-vivo evaluation. This study demonstrates the application of QbD methodology for the development and optimization of an effective topical nanoemulgel formulation for the treatment of Impetigo focusing on the selection of appropriate excipients, optimization of formulation and process variables, and characterization of critical quality attributes. BBD was used to study the effect of "% of oil, % of Smix and homogenization speed" on critical quality attributes "globule size and % entrapment efficiency" for the optimisation of Ozenoxacin Nano-emulsion. Ozenoxacin loaded nano-emulgel was characterized for "description, identification, pH, specific gravity, amplitude sweep, viscosity, assay, organic impurities, antimicrobial effectiveness testing, in-vitro release testing, ex-vivo permeation testing, skin retention and in-vivo anti-bacterial activity". In-vitro release and ex-vivo permeation, skin retention and in-vivo anti-bacterial activity were found to be significantly (p < 0.01) higher for the nano-emulgel formulation compared to the innovator formulation (OZANEX™). Antimicrobial effectiveness testing was performed and found that even at 70% label claim of benzoic acid is effective to inhibit microbial growth in the drug product. The systematic application of QbD principles facilitated the successful development and optimization of a Ozenoxacin Nano-Emulsion. Optimised Ozenoxacin Nano-Emulgel can be considered as an effective alternative and found to be stable at least for 6 months at 40 °C / 75% RH and 30 °C / 75% RH.

Formulation and optimisation of Ozenoxacin topical nano-emulgel including a comprehensive methodology to qualify and validate the critical parameters of an in-vitro release test method and ex-vivo permeation test.

OBJECTIVE: The purpose of this study was to formulate, optimize Ozenoxacin topical nano-emulsion using factorial design followed by to prepare and evaluate nano-emulgel using validated in-vitro release testing (IVRT) technique for determination of Ozenoxacin release rate along with ex-vivo permeation testing (EVPT).Significance: Nano-emulgel is a proven delivery system for poorly soluble substances works by enhancing the solubility and bioavailability. Factorial design provides a systematic and efficient means to study the effect of multiple factors on responses. IVRT is an USP compendia technique utilized for performance analysis of semi-solid formulations. METHODS: Nano-emulsion formulation optimization was done with factorial design, evaluated for globule size and % entrapment efficiency (EE). Nano-emulgels were characterized for assay, organic impurities, rheological behavior, IVRT, EVPT, and skin retention studies. IVRT validation was executed using vertical diffusion cells (VDCs). RESULTS: Ozenoxacin nano-emulsion was optimized with 1:1 ratio of Oil: Smix, 3:1 ratio of Surfactant:Co-Surfactant, and 15000 RPM of homogenization speed which resulted 414.6 ± 5.2 nm globule size and 92.8 ± 2.1% entrapment efficiency. Results confirmed that IVRT and Reversed Phase - High Performance Liquid Chromatographic techniques were validated as per regulatory guidelines. In-vitro, ex-vivo drug release, and skin retention from the optimized nano-emulgel formulation was comparatively higher (∼1.5 times) than that from the innovator (OZANEXTM) formulation. CONCLUSIONS: Based on these results, Ozenoxacin nano-emulgel can be considered an effective alternative and was found to be stable at 40 °C/75% RH and 30 °C/75% RH storage condition for 6 months.

Design of iso-material heterostructures of TiO2via seed mediated growth and arrested phase transitions.

Stabilization of different morphologies of iso-material native/non-native heterostructures is important for electron-hole separation in the context of photo-electrochemical and opto-electronic devices. In this regard, we explore the stabilities of different morphologies of rutile ("native", ground state phase) and anatase ("non-native" phase) TiO2 heterostructures through (1) seed-mediated growth and (2) a thermally induced arrested phase transition synthesis protocol. Furthermore, the experimental results are analyzed through a combination of Density Functional Tight Binding (DFTB) and Finite Element Model (FEM) methods. During the seed-mediated growth, anatase is grown over a polydispersed and polycrystalline rutile core through thermal treatment yielding core-shell, Janus and yolk-shell iso-material heterostructures as observed from HRTEM. The arrested phase transition of anatase to rutile at different annealing temperatures yields rutile crystals in the subsurface region of the anatase and rutile/core-thin anatase/shell heterostructures but does not yield a Janus structure. Small particles that can be modeled via DFTB computations suggest that: (1) a heterostructure of the rutile/core-anatase/shell is energetically more stable than the anatase/core-rutile/shell or any other Janus configuration, (2) the off-centered rutile/core-anatase shell is more favorable to the mid-centered rutile/core-anatase shell and (3) Janus heterostructures can be stabilized when the mass ratio of the rutile seed to anatase overgrowth is high. FEM simulations, performed to evaluate the importance of stress relaxation in bicrystalline materials without defects, suggest that Janus structures can be stabilized in larger particles. The present studies add to the heuristics available for synthesizing iso-material heterostructures.

Coupled optical absorption, charge carrier separation, and surface electrochemistry in surface disordered/hydrogenated TiO2 for enhanced PEC water splitting reaction.

The central governing factors that influence the efficiency of photoelectrochemical (PEC) water splitting reaction are photon absorption, effective charge-carrier separation, and surface electrochemistry. Attempts to improve one of the three factors may debilitate other factors and we explore such issues in hydrogenated TiO2, wherein a significant increase in optical absorption has not resulted in a significant increase in PEC performance, which we attribute to the enhanced recombination rate due to the formation of amorphization/disorderness in the bulk during the hydrogenation process. To this end, we report a methodology to increase the charge-carrier separation with enhanced optical absorption of hydrogenated TiO2. Current methodology involves hydrogenation of non-metal (N and S) doped TiO2 which comprises (1) lowering of the band gap through shifting of the valence band via less electronegative non-metal N, S-doping, (2) lowering of the conduction band level and the band gap via formation of the Ti(3+) state and oxygen vacancies by hydrogenation, and (3) material processing to obtain a disordered surface structure which favors higher electrocatalytic (EC) activity. This design strategy yields enhanced PEC activity (%ABPE = 0.38) for the N-S co-doped TiO2 sample hydrogenated at 800 °C for 24 h over possible combinations of N-S co-doped TiO2 samples hydrogenated at 500 °C/24 h, 650 °C/24 h and 800 °C/72 h. This suggests that hydrogenation at lower temperatures does not result in much increase in optical absorption and prolonged hydrogenation results in an increase in optical absorption but a decrease in charge carrier separation by forming disorderness/oxygen vacancies in the bulk. Furthermore, the difference in double layer capacitance (C(dl)) calculated from electrochemical impedance spectroscopy (EIS) measurements of these samples reflects the change in the electrochemical surface area (ECSA) and facilitates assessing the key role of surface electrochemistry in PEC water splitting reaction. Additionally, we observed a blue-shift of the absorption spectrum and a decrease in both electrochemical (EC) and photoelectrochemical (PEC) activities after the removal of surface layers through focused ion beam (FIB) sputtering suggesting the importance of surface defects and photon absorption.

Generic process for highly stable metallic nanoparticle-semiconductor heterostructures via click chemistry for electro/photocatalytic applications.

Metallic nanoparticles (MNP) are utilized as electrocatalysts, cocatalysts, and photon absorbers in heterostructures that harvest solar energy. In such systems, the interface formed should be stable over a wide range of pH values and electrolytes. Many current nonthermal processing strategies rely on physical interactions to bind the MNP to the semiconductor. In this work, we demonstrate a generic chemical approach for fabricating highly stable electrochemically/photocatalytically active monolayers and tailored multilayered nanoparticle structures using azide/alkyne-modified Au, TiO2, and SiO2 nanoparticles on alkyne/azide-modified silicon, indium tin oxide, titania, stainless steel, and glass substrates via click chemistry. The stability, electrical, electrochemical, and photocatalytic properties of the interface are shown via electrochemical water splitting, methanol oxidation, and photocatalytic degradation of Rhodamine B (RhB) dye. The results suggest that the proposed approach can be extended for the large-scale fabrication of highly stable heterostructure materials for electrochemical and photoelectrocatalytic devices.